Skip to main navigation Skip to search Skip to main content

Klinische MRT bei 3 Tesla: Aktueller Stand

Translated title of the contribution: Clinical MR at 3 Tesla: Current Status
  • K. T. Baudendistel
  • , J. T. Heverhagen
  • , M. V. Knopp

Research output: Contribution to journal › Review article › peer-review

Abstract

Clinical MRI is mostly performed at field strengths up to 1.5 Tesla (T). Recently, approved clinical whole-body MR-systems with a field strength of 3 T became available. Its installation base is more rapidly growing than anticipated. While siting requirements and operation of these systems do not differ substantially from systems with lower field strength, there are differences in practical applications. Imaging applications can use the gain in signal-to-noise for increased spatial resolution or gain in speed. This comes at a trade off in increased sensitivity to field inhomogeneities and changes in relaxation times, which lead to changes in image contrast. The benefit of high field for spectroscopy consists in increased signal-to-noise-ratio and improvement in frequency resolution. The increase in energy deposition necessitates the use of special strategies to reduce the specific absorption rate (SAR). This paper summarizes the current state of MR at 3 T.

Translated title of the contributionClinical MR at 3 Tesla: Current Status
Original languageGerman
Pages (from-to)11-18
Number of pages8
JournalRadiologe
Volume44
Issue number1
DOIs
StatePublished - Jan 2004

Keywords

  • 3 T-MRI
  • Contrast mechanisms
  • High-field-MRI
  • Whole body imaging

Fingerprint

Dive into the research topics of 'Clinical MR at 3 Tesla: Current Status'. Together they form a unique fingerprint.

Cite this